配置选项            

Tritex II DC Rotary Actuator Configuration Options

RDM/G Motor Type
RDM = Tritex II DC Rotary Motor (60, 75, 90 mm)
RDG = Tritex II DC Rotary Gearmotor (60, 75, 90 mm)

AAA = Frame Size
BBB = Gear Ratio
C = Shaft Type
D = Connections
E = Housing Options
F = Brake Options
GG = Feedback Type

HHH-HH = Motor Stators
Motor options are described with a 3-digit code. The first digit calls out the stack length, the second digit designates the rated bus voltage, and the third digit identifies the number of poles. Please refer to the mechanical/electrical specifications for motor torque and actuator rated force.

RDM/G060 Stators
(all 8 Pole and Class 180H)
RDM/G075 Stators
(all 8 Pole and Class 180H)
RDM/G090 Stators
(all 8 Pole and Class 180H)
1B8-50 = 1 stack, 48 VDC, 5000 rpm1B8-40 = 1 stack, 48 VDC, 4000 rpm1B8-33 = 1 stack, 48 VDC, 3300 rpm
2B8-50 = 2 stack, 48 VDC, 5000 rpm2B8-30 = 2 stack, 48 VDC, 3000 rpm2B8-18 = 2 stack, 48 VDC, 1800 rpm
3B8-40 = 3 stack, 48 VDC, 4000 rpm3B8-20 = 3 stack, 48 VDC, 2000 rpm3B8-14 = 3 stack, 48 VDC, 1400 rpm

III = Voltage
JJJ = Option Board

 

标准功能           

Tritex II DC Rotary Standard Features

  • Analog and digital I/O
  • Built-in positioner
  • Internal terminals accessible through removable cover (on 75 and 90 mm models)
  • Threaded ports for cable glands (on 75 and 90 mm models)
  • M8 connector for RS485
  • M12 connector for EtherNet options
  • Embedded leads
  • RS485 port, Modbus RTU (opto-isolated)

 

 

 

*某些选项不适用于每个配置。 对于以上未列出的选项或特殊功能或扩展温度操作,请咨询Exlar应用工程

 

有关1级认证的说明,请点击此处

Exlar执行器的IP等级