TRITEX II直流线性执行器 (DC Linear):

  • TDX060
    • 性能规格

      TDM/X060 Mechanical Specifications

       Units0.1 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)339 (1508)528 (2349)N/A
      Peak Forcelbf (N)641 (2851)666 (2963)N/A
      Max Speed @ 48 VDCin/sec (mm/sec)8.33 (211.6)8.33 (211.6)N/A
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)2075 (9230)2075 (9230)NA
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)1568 (6970)1568 (6970)NA
      Units0.2 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)180 (801)280 (1246)347 (1544)
      Peak Forcelbf (N)340 (1512)354 (1575)454 (2019)
      Max Speed @ 48 VDCin/sec (mm/sec)16.67 (423.4)16.67 (423.4)13.33 (338.6)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)1540 (6850)1540 (6850)1540 (6850)
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)1219 (5422)1219 (5422)1219 (5422)
      Units0.4 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)95 (423)148 (658)184 (818)
      Peak Forcelbf (N)180 (801)187 (832)240 (1068)
      Max Speed @ 48 VDCin/sec (mm/sec)33.33 (846.6)33.33 (846.6)26.67 (677.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)1230 (5471)1230 (5471)1230 (5471)
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)738 (3283)738 (3283)738 (3283)
      UnitsUniversal Specifications
      SpeedRPM @ 48 VDC500050004000
      Drive Current @
      Continuous Force
      Amps14.7521.521.5
      Available Stroke Lengthsin (mm)3 (76), 6 (152),
      10 (254), 12 (305)
      Inertia (zero stroke)lb-in-s^2/ Kg-m^20.0007758
      (0.0000008766)
      0.0008600
      (0.0000009717)
      0.0009442
      (0.000001067)
      Inertia Adder (per unit of stroke)lb-in-s^2/in/ Kg-m^2/in0.00004667
      (0.00000005273)
      0.00004667
      (0.00000005273)
      0.00004667
      (0.00000005273)
      Inertia Adder (per unit of stroke)lb (kg)4 lbs – 3 in stroke, 1 stack,
      add 1 lb per inch of stroke,
      add 3 lbs per stack,
      add 3 lbs for brake.
      (1.8 kg – 75 mm stroke, 1 stack,
      add 0.5 kg per 25 mm of stroke,
      add 1.4 kg per stack,
      add 1.4 kg for brake.)
      Operating Temperature Range**-20 to 65˚ C (-40˚C available, consult Exlar)
      Maximum Continuous
      Power Supply Current*
      Amps111515
      *Power supply current is based on software current limit, not thermal limit. Consideration for peak current should also be considered when sizing power supplies. **Rating based on 40˚ C ambient conditions.
      *** Legacy Product
    • 数据曲线

       


       

       


       

    • 估计寿命曲线

    • 订购指南

      要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

       

       

       

      产品选型指南

      为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本Exlar应用工作表

      AAA = Actuator Type

      TDX = Tritex II Linear Actuator, high mechanical capacity

       

      BBB = Actuator Frame Size

      060 = 60 mm
      075 = 075 mm

       

      CC = Stroke Length (nominal)

      03 = 3 inches (76 mm)
      06 = 6 inches (150 mm)
      10 = 10 inches (254 mm)
      12 = 12 inches (305 mm)
      14 = 14 inch (356 mm) (75 mm only)
      18 = 18 inches (457 mm) (75 mm only)

       

      DD = Lead (linear travel per screw revolution)

      01 = 0.1 inch (2.54 mm)
      02 = 0.2 inch (5.08 mm)
      04 = 0.4 inch (10.16 mm) (60 mm only)
      05 = 0.5 inch (12.7 mm) (75 mm only) 

       

      E = Connections 

      G = Standard straight threaded port with internal terminals, M20x1.5 (75 mm only)
      N = NPT threaded port via adapter with Internal terminals, 1/2″ NPT (75 mm only)
      I = Interconnect style – Exlar std, M23 style connector.

       

      F = Mounting

      C = Rear Clevis
      G = Metric Rear Clevis
      D = Double Side Mount
      K = Metric Double Side Mount
      E = Extended Tie Rod
      M = Metric Extended Tie Rod
      F = Front Flange
      R = Rear Flange
      T = Side Trunnion
      Q = Metric Side Trunnion

       

      G = Rod End

      M = Male US Standard Thread *
      A = Male Metric Thread *
      F = Female US Standard Thread *
      B = Female Metric Thread *

      *Chrome-plated carbon steel. Threads not chrome-plated

       

      HH = Feedback Type

      HD = Analog Hall Device
      IE = Incremental Encoder, 8192 count resolution
      AF = Absolute Feedback

       

      III-II = Motor Stator, All 8 Pole

      TDX060
      1B8-50 = 1 stack, 48 VDC, 5000 rpm
      2B8-50 = 2 stack, 48 VDC, 5000 rpm
      3B8-40 = 3 stack, 48 VDC, 4000 rpm*

       

      TDX075
      1B8-30 = 1 stack, 48 VDC, 3000 rpm
      2B8-30 = 2 stack, 48 VDC, 3000 rpm
      3B8-20 = 3 stack, 48 VDC, 2000 rpm*

       

      * N/A with 0.1 inch lead, N/A on 3 inch stroke

      JJJ = Voltage

      048 = 12-48 VDC

       

      KKK = Option  Board

      SIO = Standard I/O Interconnect
      IA4 = 4-20mA Analog I/O
      COP = CANopen
      CON = CANopen, non-connectorized*
      EIP = SIO plus Ethernet/IP with M12 connector
      EIN = SIO plus Ethernet/IP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      PIN = SIO plus Profinet IO without M12 connector*
      TCP = SIO plus Modbus TCP/IP with M12 connector
      TCN = SIO plus Modbus TCP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      TCP = SIO plus Modbus TCP/IP with M12 connector

       

      * Requires customer supplied Ethernet cable through I/O port for Class I Division 2 compliance only

      MM = Mechanical Options

      AR = External Anti-rotate
      L1/2/3 = External Limit Switches  (1)
      RB = Rear Brake
      SR = Anti-Rotate, Internal Splined Main Rod  (2)

      For extended temperature operation consult factory for model number.

      1. Limit switch option requires AR option.
      2. Consult Applications Engineering

       

  • TDX075
    • 性能规格

      TDM/X075 Mechanical Specifications

       Units0.1 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)613 (2727)872 (3879)NA
      Peak Forcelbf (N)884 (3932)1190 (5293)NA
      Max Speed @ 48 VDCin/sec (mm/sec)5.00 (127)5.00 (127)NA
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)5516 (24536)5516 (24536)NA
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)3310 (14724)3310 (14724)NA
      Units0.2 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)347 (1544)494 (2197)774 (3443)
      Peak Forcelbf (N)501 (2229)674 (2998)1095 (4871)
      Max Speed @ 48 VDCin/sec (mm/sec)10.00 (254)10.00 (254)6.67 (169.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)5800 (25798)5800 (25798)5800 (25798)
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)3570 (15880)3570 (15880)3570 (15880)
      Units0.5 Inch Lead
      1 Stack2 Stack3 Stack
      Continuous Forcelbf (N)147 (654)209 (930)328 (1459)
      Peak Forcelbf (N)212 (943)286 (1272)464 (2064)
      Max Speed @ 48 VDCin/sec (mm/sec)25.00 (635)25.00 (635)16.67 (423.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)4900 (21795)4900 (21795)4900 (21795)
      TDM*** - C_a
      (Dynamic Load Rating)
      lbf (N)3016 (13416)3016 (13416)3016 (13416)
      UnitsUniversal Specifications
      SpeedRPM @ 48 VDC300030002000
      Drive Current @
      Continuous Force
      Amps18.522.522.5
      Available Stroke Lengthsin (mm)3 (76), 6 (152), 10 (254),
      12 (305), 14 (356), 18 (457)
      Inertia (zero stroke)lb-in-s^2/ Kg-m^20.01132 (0.000012790)0.01232 (0.00001392)0.01332 (0.00001505)
      Inertia Adder
      (per unit of stroke)
      lb-in-s^2/in/ Kg-m^2/in0.0005640 (0.0000006372)
      Approximate Weight lb (kg)11 lbs – 3 in stroke,
      add 1 lb per inch of stroke,
      add 3 lbs per stack,
      add 3 lbs for brake.
      (5 kg – 75 mm stroke, 1 stack,
      add 0.5 kg per 25 mm of stroke,
      add 1.4 kg per stack,
      add 1.4 kg for brake.)
      Operating Temperature Range**-20 to 65˚ C (-40˚C available, consult Exlar)
      Maximum Continuous
      Power Supply Current*
      Amps151818
      *Power supply current is based on software current limit, not thermal limit. Consideration for peak current should also be considered when sizing power supplies.
      **Rating based on 40˚ C ambient conditions.
      *** Legacy Product
    • 数据曲线

       


       

       


       

    • 估计寿命曲线

    • 订购指南

      要从Exlar订购产品,需要一个唯一的模型掩码(标识号)。 模型掩码是一个字符串,用于标识模型,大小和配置替代。

       

       

       

      产品选型指南

      为了方便您的订购过程,请在与您所在地区的销售代表联系之前,随时打印并填写本Exlar应用工作表

      AAA = Actuator Type

      TDX = Tritex II Linear Actuator, high mechanical capacity

       

      BBB = Actuator Frame Size

      060 = 60 mm
      075 = 075 mm

       

      CC = Stroke Length (nominal)

      03 = 3 inches (76 mm)
      06 = 6 inches (150 mm)
      10 = 10 inches (254 mm)
      12 = 12 inches (305 mm)
      14 = 14 inch (356 mm) (75 mm only)
      18 = 18 inches (457 mm) (75 mm only)

       

      DD = Lead (linear travel per screw revolution)

      01 = 0.1 inch (2.54 mm)
      02 = 0.2 inch (5.08 mm)
      04 = 0.4 inch (10.16 mm) (60 mm only)
      05 = 0.5 inch (12.7 mm) (75 mm only) 

       

      E = Connections 

      G = Standard straight threaded port with internal terminals, M20x1.5 (75 mm only)
      N = NPT threaded port via adapter with Internal terminals, 1/2″ NPT (75 mm only)
      I = Interconnect style – Exlar std, M23 style connector.

       

      F = Mounting

      C = Rear Clevis
      G = Metric Rear Clevis
      D = Double Side Mount
      K = Metric Double Side Mount
      E = Extended Tie Rod
      M = Metric Extended Tie Rod
      F = Front Flange
      R = Rear Flange
      T = Side Trunnion
      Q = Metric Side Trunnion

       

      G = Rod End

      M = Male US Standard Thread *
      A = Male Metric Thread *
      F = Female US Standard Thread *
      B = Female Metric Thread *

      *Chrome-plated carbon steel. Threads not chrome-plated

       

      HH = Feedback Type

      HD = Analog Hall Device
      IE = Incremental Encoder, 8192 count resolution
      AF = Absolute Feedback

       

      III-II = Motor Stator, All 8 Pole

      TDX060
      1B8-50 = 1 stack, 48 VDC, 5000 rpm
      2B8-50 = 2 stack, 48 VDC, 5000 rpm
      3B8-40 = 3 stack, 48 VDC, 4000 rpm*

       

      TDX075
      1B8-30 = 1 stack, 48 VDC, 3000 rpm
      2B8-30 = 2 stack, 48 VDC, 3000 rpm
      3B8-20 = 3 stack, 48 VDC, 2000 rpm*

       

      * N/A with 0.1 inch lead, N/A on 3 inch stroke

      JJJ = Voltage

      048 = 12-48 VDC

       

      KKK = Option  Board

      SIO = Standard I/O Interconnect
      IA4 = 4-20mA Analog I/O
      COP = CANopen
      CON = CANopen, non-connectorized*
      EIP = SIO plus Ethernet/IP with M12 connector
      EIN = SIO plus Ethernet/IP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      PIN = SIO plus Profinet IO without M12 connector*
      TCP = SIO plus Modbus TCP/IP with M12 connector
      TCN = SIO plus Modbus TCP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      TCP = SIO plus Modbus TCP/IP with M12 connector

       

      * Requires customer supplied Ethernet cable through I/O port for Class I Division 2 compliance only

      MM = Mechanical Options

      AR = External Anti-rotate
      L1/2/3 = External Limit Switches  (1)
      RB = Rear Brake
      SR = Anti-Rotate, Internal Splined Main Rod  (2)

      For extended temperature operation consult factory for model number.

      1. Limit switch option requires AR option.
      2. Consult Applications Engineering