GTX Series:

  • GTX080
    • Performance Specifications

      GTX080 Mechanical Specifications

       Stroke Length mm (in)Screw Lead mm (in)Continuous Force Rating N (lbf)Max Velocity mm/s (in/s)Dynamic Load Rating N (lbf)Armature Inertia kg-m^2 (in-lb-s^2)
      Maximum velocities listed at maximum voltages. Do not exceed 2X the continuous force rating during operation.
      Dynamic load ratings valid at forces up to 2X the continuous force rating. Continuous force rating based upon 25° C ambient conditions
      4 (VAC)D (VDC)4 (VAC)D (VDC)
      GTX080-100-01100 (3.9)2.54 (0.1)5,897 (1,326)5,897 (1,326)254 (10.0)102 (4.0)24,535 (5,516)0.000340 (0.003013)
      GTX080-100-025.08 (0.2)4,485 (1,008)4,061 (913)508 (20.0)203 (8.0)25,798 (5,800)0.000340 (0.003013)
      GTX080-100-0512.7 (0.5)1,900 (427)1,720 (387)1,270 (50.0)508 (20.0)21,795 (4,900)0.000340 (0.003013)
      GTX080-150-01150 (5.9)2.54 (0.1)5,897 (1,326)5,897 (1,326)254 (10.0)102 (4.0)24,535 (5,516)0.000369 (0.003267)
      GTX080-150-025.08 (0.2)4,485 (1,008)4,061 (913)508 (20.0)203 (8.0)25,798 (5,800)0.000369 (0.003267)
      GTX080-150-0512.7 (0.5)1,900 (427)1,720 (387)1,270 (50.0)508 (20.0)21,795 (4,900)0.000369 (0.003267)
      GTX080-300-01300 (11.8)2.54 (0.1)5,897 (1,326)5,897 (1,326)254 (10.0)102 (4.0)24,535 (5,516)0.000455 (0.004029)
      GTX080-300-025.08 (0.2)4,485 (1,008)4,061 (913)508 (20.0)203 (8.0)25,798 (5,800)0.000455 (0.004029)
      GTX080-300-0512.7 (0.5)1,900 (427)1,720 (387)1,270 (50.0)508 (20.0)21,795 (4,900)0.000455 (0.004029)
      GTX080-450-01450 (17.7)2.54 (0.1)5,897 (1,326)5,897 (1,326)254 (10.0)102 (4.0)24,535 (5,516)0.000541 (0.004790)
      GTX080-450-025.08 (0.2)4,485 (1,008)4,061 (913)508 (20.0)203 (8.0)25,798 (5,800)0.000541 (0.004790)
      GTX080-450-0512.7 (0.5)1,900 (427)1,720 (387)1,270 (50.0)508 (20.0)21,795 (4,900)0.000541 (0.004790)

       

       

      GTX080 Electrical Specifications

      Motor Voltage 4 (AC)D (DC)
      Specifications subject to change without notice. Test data derived using NEMA recommended aluminum heatsink 10" x 10" x 1/4" at 25°C ambient. VAC class winding operational from 115 - 460 VAC. VDC Class winding operational from 24 - 48 VDC. Rotational speed linear proportional to input voltage
      Max Bus VoltageV460 Vrms48 VDC
      Speed @ Bus VoltageRPM60002400
      RMS Sinusoidal Commutation
      Continuous Motor TorqueNm4.273.86
      lbf-in37.834.2
      Continuous Current RatingA4.724.5
      Peak Current RatingA9.448.9
      Torque Constant (Kt) (+/– 10% @ 25˚C)Nm/A1.020.18
      lbf-in/A91.6
      Voltage Constant (Ke) (+/– 10% @ 25˚C)V/kRPM61.610.7
      0 - Peak Sinusoidal Commutation
      Continuous Motor TorqueNm4.273.86
      lbf-in37.834.2
      Continuous Current RatingA6.634.6
      Peak Current RatingA13.369.2
      Torque Constant (Kt) (+/– 10% @ 25˚C)Nm/A0.720.13
      lbf-in/A6.41.1
      Voltage Constant (Ke) (+/– 10% @ 25˚C)V/kRPM87.115.1
      Pole ConfigurationNumber of Poles88
      Resistance (L-L) (+/– 5% @ 25˚C)Ohms2.80.1
      Inductance (L-L)(+/– 15%)mH15.50.46
      Electrical Time Constantms5.54.4
      Insulation Class460 VAC Max, 180°C (Class H)

       

       

      GTX080 Weights

      GTX080 Weights 
      Descriptionkg (lb)
      GTX080-1004.6 (10.0)
      GTX080-1505.2 (11.4)
      GTX080-3007.0 (15.4)
      GTX080-4508.9 (19.5)
      Brake Adder1.1 (2.5)
      Front Flange (1)1.0 (2.2)
      Tapped Face (3)0.6 (1.2)
      Rear Clevis (5)0.4 (0.8)
      Imperial Flange (F)0.8 (1.8)
      Imperial Clevis (C)0.8 (1.7)
      Anti Rotate (100 mm stroke)0.5 (1.1)
      Anti Rotate (150 mm stroke)0.6 (1.3)
      Anti Rotate (300 mm stroke)0.8 (1.8)
      Anti Rotate (450 mm stroke)1.1 (2.4)
      Limit Switch Assembly w/Anti-Rotate (100 mm stroke)0.9 (1.9)
      Limit Switch Assembly w/Anti-Rotate (150 mm stroke)1.0 (2.3)
      Limit Switch Assembly w/Anti-Rotate (300 mm stroke)1.6 (3.5)
      Limit Switch Assembly w/Anti-Rotate (450 mm stroke)2.1 (4.7)
    • Data Curves

                                                            VAC Class                                                                                                                VDC Class

    • Estimated Life Time Curves

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

       

      AAA=Actuator Frame Size

      080 = 80 mm (3.15 in)

      BBB = Stroke Length

      100 = 100 mm
      150 = 150 mm
      300 = 300 mm
      450 = 450 mm

      CC=Screw Lead

      01 = 0.10 in (2.54 mm)
      02 = 0.20 in (5.08 mm)
      05 = 0.50 in (12.7 mm)

      D=Winding Voltage

      4 = 460 VAC Max (115 VAC – 460 VAC)
      D = 48 VDC Max (24 VDC – 48 VDC)

       

      E=Rod End Thread / Rod Material

      A = Male, metric thread
      B = Female, metric thread

      FF=Drive Manufacturer

      BE = Beckhoff
      BR = B&R Automation
      CT = Control Techniques/Nidec
      EU = Elau/Schneider
      EL = Elmo Motion Control
      EX = Exlar
      IN = Indramat/Bosch-Rexroth
      KM = Kollmorgen/Danaher
      LZ = Lenze/AC Tech
      PH = Parker Compumotor
      RA= Rockwell Automation
      SM = Siemens
      SB = Stober Drives

       

       

      GGGG=Feedback Type

      To order specific feedback type, select feedback and manufacture code below. Example of ordering code: BE-H1A2.

       

      Beckhoff:

      Heidenhain (BE-H1A2) -EnDat Heidenhain EQN1125 multi-turn absolute encoder – AM5XX motor wiring w/M23 connectors

       

      B&R Automation:
      Resolver (BR-R1A1) – Standard Resolver w/M23 connectors
      Heidenhain (BR-H1A2) – EnDat Heidenhain EQN1125 multi-turn absolute encoder – 8LS/8LM motor wiring w/M23 connectors

       

      Control Techniques/Nidec:
      Resolver (CT-R2B1) – Standard Resolver – FM/UM/EZ motor wiring w/M23 connectors
      Encoder (CT-E1B2) – Standard Incremental Encoder –FM/UM/EZ motor wiring w/M23 connectors
      Stegmann (CT-S1B1)– Hiperface Stegmann SKM36 multi-turn absolute encoder – FM/UM/EZ motor wiring w/M23 connectors
      Heidenhain (CT-H1B2) –  EnDat Heidenhain EQN1125 multi-turn absolute encoder unidrive SP w/M23 connectors

       

      Elau/Schneider:

      Stegmann (EU-S1A1) – Hiperface Stegmann SKM36 multi-turn absolute encoder – SH motor wiring w/M23 connectors

       

      Elmo Motion Control:

      Resolver (EL-R1B1) – Standard Resolver
      Encoder (EL-E1B2) – Standard Incremental Encoder
      Heidenhain (EL-H1B2) – EnDat Heidenhain EQN1125 multi-turn absolute encoder w/M23 connectors

       

      Exlar:

      Resolver (EX-R1A1) – Standard Resolver w/M23 connectors
      Encoder (EX-E1A2) – Standard Incremental Encoder 2048 Line w/M23 connectors
      Stegmann (EX-S1A2) – Hiperface Stegmann SKM36 multi-turn absolute encoder w/M23 connectors
      Heidenhain (EX-H1A2) – EnDat Heidenhain EQN1125 multi-turn absolute encoder w/M23 connectors

       

      Indramat/Bosch-Rexroth:

      Stegmann (IN-S2D3)– Hiperface Stegmann multi-turn absolute encoder – MSK motor wiring w/M23 connectors
      Heidenhain (IN-H1D3)– EnDat Heidenhain EQN1125 multi-turn absolute Indradrive wiring w/M23 connectors

       

      Kollmorgen/Danaher:

      Resolver (KM-R2A1) – Standard Resolver – AKM motor wiring w/M23 connectors
      Encoder (KM-E1A2) – Standard Incremental Encoder – AKM motor wiring w/ M23 connectors

       

      Lenze/AC Tech:

      Resolver (LZ-R1B1) – Standard Resolver – MCS motor wiring w/M23 connectors
      Encoder (LZ-E1B2) – Standard Incremental Encoder – MCS motor wiring w/M23 connectors

       

      Parker Compumotor:

      Resolver (PC-R1B1) – Standard Resolver – SMH motor wiring w/M23 connectors
      Encoder (PC-E1B2) – Standard Incremental Encoder – MPP series motor wiring w/M23 connectors

       

      Rockwell Automation:*
      Resolver (RA-R3A4) – Standard Resolver w/M23 connectors
      Encoder (RA-E1C2) – Standard Incremental Encoder – MPL Type M feedback w/M23 connectors
      Stegmann (RA-S1C2) – Hiperface, SKM36 multi-turn absolute encoder. MPL Type V feedback (128 sin/cos) /M23 connectors1
      Stegmann DSL (RA-S3CO) – Hiperface DSL Stegmann, EKM36 multi-turn absolute encoder

       

      Siemens:

      Resolver (SM-R1B1) – Standard Resolver – 1FK7 motor wiring w/M23 connectors
      Heidenhain (SM-H1B2) – EnDat Heidenhain EQN1125 multi-turn absolute encoder – 1FK7 motor wiring w/M23 connectors

       

      Stober Drives:

      Resolver (SB-R2A1) – Standard Resolver ED/EK motor wiring w/M23 connector
      Heidenhain (SB-H1A1) – EnDat Heidenhain EQN1125 multi-turn absolute encoder – ED/EK motor wiring w/M23 euro connectors

       

      NOTES:
      1. Not compatible with Kinetix 300 Drives.

      H=Internal Holding Brake

      N = No Brake
      B = Internal Holding Brake, Electronically Released

       

      M=Mounting Options

      N = None
      1 = Front Mounting Flange, Metric
      3 = Tapped Face, Metric
      5 = Rear Clevis, Metric

      N = Other Options

      N= None
      A = Anti-Rotate, External
      L = Limit Switch Housing / Anti-Rotate Assembly (Switches not included)