Configuration Options

Tritex II DC Rotary Actuator Configuration Options

RDM/G Motor Type
RDM = Tritex II DC Rotary Motor (60, 75, 90 mm)
RDG = Tritex II DC Rotary Gearmotor (60, 75, 90 mm)

AAA = Frame Size
BBB = Gear Ratio
C = Shaft Type
D = Connections
E = Housing Options
F = Brake Options
GG = Feedback Type

HHH-HH = Motor Stators
Motor options are described with a 3-digit code. The first digit calls out the stack length, the second digit designates the rated bus voltage, and the third digit identifies the number of poles. Please refer to the mechanical/electrical specifications for motor torque and actuator rated force.

RDM/G060 Stators
(all 8 Pole and Class 180H)
RDM/G075 Stators
(all 8 Pole and Class 180H)
RDM/G090 Stators
(all 8 Pole and Class 180H)
1B8-50 = 1 stack, 48 VDC, 5000 rpm1B8-40 = 1 stack, 48 VDC, 4000 rpm1B8-33 = 1 stack, 48 VDC, 3300 rpm
2B8-50 = 2 stack, 48 VDC, 5000 rpm2B8-30 = 2 stack, 48 VDC, 3000 rpm2B8-18 = 2 stack, 48 VDC, 1800 rpm
3B8-40 = 3 stack, 48 VDC, 4000 rpm3B8-20 = 3 stack, 48 VDC, 2000 rpm3B8-14 = 3 stack, 48 VDC, 1400 rpm

III = Voltage
JJJ = Option Board

 

Standard Features

Tritex II DC Rotary Standard Features

  • Analog and digital I/O
  • Built-in positioner
  • Internal terminals accessible through removable cover (on 75 and 90 mm models)
  • Threaded ports for cable glands (on 75 and 90 mm models)
  • M8 connector for RS485
  • M12 connector for EtherNet options
  • Embedded leads
  • RS485 port, Modbus RTU (opto-isolated)

 

Mechanical Options              

HW = Manual Drive – Handwheel (on 75 and 90 mm models)

A manual drive handwheel installed on the side of the actuator. Includes an engage/disengage lever that controls an interrupt switch. This lever is not tied to the motor and must be engaged/disengaged, before operating the motor. Not available on all products and may not be available with a holding brake. *

 

*  Some options are not available with every configuration. For options or specials not listed above or for extended temperature operation, please consult Exlar Applications Engineering.

 

For a description of Class 1 Certifications click here
IP Ratings for Exlar Actuators