Tritex II® DC Linear Actuator:

  • TDM/X060
    • Performance Specifications

      TDM/X060 Mechanical Specifications

        Stator1 Stack2 Stack3 Stack
      *Power supply current is based on software current limit, not thermal limit. Consideration for peak current should also be considered when sizing power supplies. **Rating based on 40˚ C ambient conditions.
      LeadRPM @ 48 VDC500050004000
      0.1Continuous Forcelbf (N)339 (1508)528 (2349)N/A
      Peak Forcelbf (N)641 (2851)666 (2963)N/A
      Max Speed @ 48 VDCin/sec (mm/sec)8.33 (211.6)8.33 (211.6)N/A
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)2075 (9230)2075 (9230)NA
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)1568 (6970)1568 (6970)NA
      0.2Continuous Forcelbf (N)180 (801)280 (1246)347 (1544)
      Peak Forcelbf (N)340 (1512)354 (1575)454 (2019)
      Max Speed @ 48 VDCin/sec (mm/sec)16.67 (423.4)16.67 (423.4)13.33 (338.6)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)1540 (6850)1540 (6850)1540 (6850)
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)1219 (5422)1219 (5422)1219 (5422)
      0.4Continuous Forcelbf (N)95 (423)148 (658)184 (818)
      Peak Forcelbf (N)180 (801)187 (832)240 (1068)
      Max Speed @ 48 VDCin/sec (mm/sec)33.33 (846.6)33.33 (846.6)26.67 (677.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)1230 (5471)1230 (5471)1230 (5471)
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)738 (3283)738 (3283)738 (3283)
      Drive Current @ Continuous ForceAmps14.7521.521.5
      Available Stroke Lengthsin (mm)3 (75), 6 (150),
      10 (254), 12 (300)
      Inertia (zero stroke)lb-in-s^2/ Kg-m^20.0007758
      (0.0000008766)
      0.0008600
      (0.0000009717)
      0.0009442
      (0.000001067)
      Inertia Adder (per unit of stroke)lb-in-s^2/in/ Kg-m^2/in0.00004667
      (0.00000005273)
      0.00004667
      (0.00000005273)
      0.00004667
      (0.00000005273)
      Approximate Weightlb (kg)4 lbs – 3 in stroke, 1 stack, add 1 lb per inch of stroke, add 3 lbs per stack,
      add 3 lbs for brake.
      (1.8 kg – 75 mm stroke, 1 stack, add 0.5 kg per 25 mm of stroke, add 1.4 kg per stack, add 1.4 kg for brake.)
      Operating Temperature Range**-20 to 65˚ C (-40˚C available, consult Exlar)
      Maximum Continuous Power Supply Current*Amps111515
    • Data Curves

      TDM060 1 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       

       


      TDM060 2 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       

       


      TDM060 3 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       

    • Estimated Life Time Curves

      TDM060 Travel Life

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

      TDM Order

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

      AAA = Actuator Type

      TDM = Tritex II Linear Actuator, standard mechanical capacity
      TDX = Tritex II Linear Actuator, high mechanical capacity

       

      BBB = Actuator Frame Size

      060 = 60 mm
      075 = 075 mm

       

      CC = Stroke Length (nominal)

      03 = 3 inches (76 mm)
      06 = 6 inches (150 mm)
      10 = 10 inches (254 mm)
      12 = 12 inches (305 mm)
      14 = 14 inch (356 mm) (75 mm only)
      18 = 18 inches (457 mm) (75 mm only)

       

      DD = Lead (linear travel per screw revolution)

      01 = 0.1 inch (2.54 mm)
      02 = 0.2 inch (5.08 mm)
      04 = 0.4 inch (10.16 mm) (60 mm only)
      05 = 0.5 inch (12.7 mm) (75 mm only) 

       

      E = Connections 

      G = Standard straight threaded port with internal terminals, M20x1.5 (75 mm only)
      N = NPT threaded port via adapter with Internal terminals, 1/2″ NPT (75 mm only)
      I = Interconnect style – Exlar std, M23 style connector.

       

      F = Mounting

      C = Rear Clevis
      G = Metric Rear Clevis
      D = Double Side Mount
      K = Metric Double Side Mount
      E = Extended Tie Rod
      M = Metric Extended Tie Rod
      F = Front Flange
      R = Rear Flange
      T = Side Trunnion
      Q = Metric Side Trunnion

       

      G = Rod End

      M = Male US Standard Thread *
      A = Male Metric Thread *
      F = Female US Standard Thread *
      B = Female Metric Thread *

      *Chrome-plated carbon steel. Threads not chrome-plated

       

      HH = Feedback Type

      HD = Analog Hall Device
      IE = Incremental Encoder, 8192 count resolution
      AF = Absolute Feedback

       

      III-II = Motor Stator, All 8 Pole

      TDM/X060
      1B8-50 = 1 stack, 48 VDC, 5000 rpm
      2B8-50 = 2 stack, 48 VDC, 5000 rpm
      3B8-40 = 3 stack, 48 VDC, 4000 rpm*

       

      TDM/X075
      1B8-30 = 1 stack, 48 VDC, 3000 rpm
      2B8-30 = 2 stack, 48 VDC, 3000 rpm
      3B8-20 = 3 stack, 48 VDC, 2000 rpm*

       

      * N/A with 0.1 inch lead, N/A on 3 inch stroke

      JJJ = Voltage

      048 = 12-48 VDC

       

      KKK = Option  Board

      SIO = Standard I/O Interconnect
      IA4 = 4-20mA Analog I/O
      COP = CANopen
      CON = CANopen, non-connectorized*
      EIP = SIO plus Ethernet/IP with M12 connector
      EIN = SIO plus Ethernet/IP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      PIN = SIO plus Profinet IO without M12 connector*
      TCP = SIO plus Modbus TCP/IP with M12 connector
      TCN = SIO plus Modbus TCP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      TCP = SIO plus Modbus TCP/IP with M12 connector

       

      * Requires customer supplied Ethernet cable through I/O port for Class I Division 2 compliance only

      MM = Mechanical Options

      AR = External Anti-rotate
      L1/2/3 = External Limit Switches  (1)
      RB = Rear Brake
      PB = Protective Bellows  (2)
      P5 = IP65 Sealed Housing (TDM only)

      For extended temperature operation consult factory for model number.

      1. Limit switch option requires AR option.
      2. Not available with extended tie rod mounting option.

       

  • TDM/X075
    • Performance Specifications

      TDM/X075 Mechanical Specifications

        Stator1 Stack2 Stack3 Stack
      *Power supply current is based on software current limit, not thermal limit. Consideration for peak current should also be considered when sizing power supplies. **Rating based on 40˚ C ambient conditions.
      LeadRPM @ 48 VDC300030002000
      0.1Continuous Forcelbf (N)613 (2727)872 (3879)NA
      Peak Forcelbf (N)884 (3932)1190 (5293)NA
      Max Speed @ 48 VDCin/sec (mm/sec)5.00 (127)5.00 (127)NA
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)5516 (24536)5516 (24536)NA
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)3310 (14724)3310 (14724)NA
      0.2Continuous Forcelbf (N)347 (1544)494 (2197)774 (3443)
      Peak Forcelbf (N)501 (2229)674 (2998)1095 (4871)
      Max Speed @ 48 VDCin/sec (mm/sec)10.00 (254)10.00 (254)6.67 (169.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)5800 (25798)5800 (25798)5800 (25798)
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)3570 (15880)3570 (15880)3570 (15880)
      0.5Continuous Forcelbf (N)147 (654)209 (930)328 (1459)
      Peak Forcelbf (N)212 (943)286 (1272)464 (2064)
      Max Speed @ 48 VDCin/sec (mm/sec)25.00 (635)25.00 (635)16.67 (423.4)
      TDX - C_a
      (Dynamic Load Rating)
      lbf (N)4900 (21795)4900 (21795)4900 (21795)
      TDM - C_a
      (Dynamic Load Rating)
      lbf (N)3016 (13416)3016 (13416)3016 (13416)
      Drive Current @ Continuous ForceAmps18.522.522.5
      Available Stroke Lengthsin (mm)3 (75), 6 (150), 10 (254),
      12 (300), 14 (355), 18 (450)
      Inertia (zero stroke)lb-in-s^2/ Kg-m^20.01132 (0.000012790)0.01232 (0.00001392)0.01332 (0.00001505)
      Inertia Adder (per unit of stroke)lb-in-s^2/in/ Kg-m^2/in0.0005640 (0.0000006372)
      Approximate Weight lb (kg)11 lbs – 3 in stroke, add 1 lb per inch of stroke, add 3 lbs per stack,
      add 3 lbs for brake.
      (5 kg – 75 mm stroke, 1 stack, add 0.5 kg per 25 mm of stroke, add 1.4 kg per stack, add 1.4 kg for brake.)
      Operating Temperature Range**-20 to 65˚ C (-40˚C available, consult Exlar)
      Maximum Continuous Power Supply Current*Amps151818

       

       

    • Data Curves

      TDM075-1 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       


      TDM075-2 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       

       


      TDM075 - 3 Stack

       

       

      *Test data derived using NEMA recommended aluminum heatsink 10” x 10” x 3/8” at 40°C ambient.

       

    • Estimated Life Time Curves

      TDM075 Travel Life

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

      TDM Order

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

      AAA = Actuator Type

      TDM = Tritex II Linear Actuator, standard mechanical capacity
      TDX = Tritex II Linear Actuator, high mechanical capacity

       

      BBB = Actuator Frame Size

      060 = 60 mm
      075 = 075 mm

       

      CC = Stroke Length (nominal)

      03 = 3 inches (76 mm)
      06 = 6 inches (150 mm)
      10 = 10 inches (254 mm)
      12 = 12 inches (305 mm)
      14 = 14 inch (356 mm) (75 mm only)
      18 = 18 inches (457 mm) (75 mm only)

       

      DD = Lead (linear travel per screw revolution)

      01 = 0.1 inch (2.54 mm)
      02 = 0.2 inch (5.08 mm)
      04 = 0.4 inch (10.16 mm) (60 mm only)
      05 = 0.5 inch (12.7 mm) (75 mm only) 

       

      E = Connections 

      G = Standard straight threaded port with internal terminals, M20x1.5 (75 mm only)
      N = NPT threaded port via adapter with Internal terminals, 1/2″ NPT (75 mm only)
      I = Interconnect style – Exlar std, M23 style connector.

       

      F = Mounting

      C = Rear Clevis
      G = Metric Rear Clevis
      D = Double Side Mount
      K = Metric Double Side Mount
      E = Extended Tie Rod
      M = Metric Extended Tie Rod
      F = Front Flange
      R = Rear Flange
      T = Side Trunnion
      Q = Metric Side Trunnion

       

      G = Rod End

      M = Male US Standard Thread *
      A = Male Metric Thread *
      F = Female US Standard Thread *
      B = Female Metric Thread *

      *Chrome-plated carbon steel. Threads not chrome-plated

       

      HH = Feedback Type

      HD = Analog Hall Device
      IE = Incremental Encoder, 8192 count resolution
      AF = Absolute Feedback

       

      III-II = Motor Stator, All 8 Pole

      TDM/X060
      1B8-50 = 1 stack, 48 VDC, 5000 rpm
      2B8-50 = 2 stack, 48 VDC, 5000 rpm
      3B8-40 = 3 stack, 48 VDC, 4000 rpm*

       

      TDM/X075
      1B8-30 = 1 stack, 48 VDC, 3000 rpm
      2B8-30 = 2 stack, 48 VDC, 3000 rpm
      3B8-20 = 3 stack, 48 VDC, 2000 rpm*

       

      * N/A with 0.1 inch lead, N/A on 3 inch stroke

      JJJ = Voltage

      048 = 12-48 VDC

       

      KKK = Option  Board

      SIO = Standard I/O Interconnect
      IA4 = 4-20mA Analog I/O
      COP = CANopen
      CON = CANopen, non-connectorized*
      EIP = SIO plus Ethernet/IP with M12 connector
      EIN = SIO plus Ethernet/IP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      PIN = SIO plus Profinet IO without M12 connector*
      TCP = SIO plus Modbus TCP/IP with M12 connector
      TCN = SIO plus Modbus TCP without M12 connector*
      PIO = SIO plus Profinet IO with M12 connector
      TCP = SIO plus Modbus TCP/IP with M12 connector

       

      * Requires customer supplied Ethernet cable through I/O port for Class I Division 2 compliance only

      MM = Mechanical Options

      AR = External Anti-rotate
      L1/2/3 = External Limit Switches  (1)
      RB = Rear Brake
      PB = Protective Bellows  (2)
      P5 = IP65 Sealed Housing (TDM only)

      For extended temperature operation consult factory for model number.

      1. Limit switch option requires AR option.
      2. Not available with extended tie rod mounting option.