FTX Series:

  • FTX095
    • Performance Specifications

      FTX095 Specifications

        51020
      Screw Leadmm51020
      in0.1970.3940.787
      Maximum Force*kN22.222.222.2
      lbf500050005000
      Life at Maximum Forcekm3926261440
      in x 10^615.424.656.7
      C_a (Dynamic Load Rating)kN95.288.392.5
      lbf214001985020800
      Maximum Input TorqueNm22.144.388.5
      lbf-in196392783
      Max Rated RPM @ Input Shaft Maximum Linear Speed @ MaximumRPM450045004500
      Rated RPMmm/sec3737501500
      in/sec14.729.559.3
      Friction TorqueNm1.121.121.12
      lbf-in101010
      Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative.
      * Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

       

      FTX095 Inertias

      Base Unit InertiaZero Stroke [kg-m^2 (lbf-in-sec^2)]Add per 25 mm [kg-m^2 (lbf-in-sec^2)] 
      —5 mm Lead8.27 x 10^-4 (7.32 x 10^-3)2.19 x 10^-6 (1.94 x 10^-5)
      —10 mm Lead8.33 x 10^-4 (7.37 x 10^-3)2.42 x 10^-6 (2.14 x 10^-5)
      —20 mm Lead8.57 x 10^-4 (7.58 x 10^-3)3.31 x 10^-6 (2.93 x 10^-5)
      Inline Drive InertiaInline Unit - w/Motor CouplingInline Unit - w/Motor Coupling For Gearbox MountAdd per 25 mm
      —5 mm Lead9.27 x 10^-4 (8.20 x 10^-3)1.09 x 10^-3 (9.62 x 10^-3)2.19 x 10^-6 (1.94 x 10^-5)
      —10 mm Lead9.33 x 10^-4 (8.26 X 10^-3)1.09 x 10^-3 (9.67 x 10^-3)2.42 x 10^-6 (2.14 x 10^-5)
      —20 mm Lead9.57 x 10^-4 (8.47 x 10^-3)1.12 x 10^-3 (9.89 x 10^-3)3.31 x 10^-6 (2.93 x 10^-5)
      Parallel Drive Inertia1:1 Reduction2:1 Reduction
      —5 mm Lead (zero stroke)4.90 x 10^-3 (4.34 x 10^-2)2.22 x 10^-3 (1.97 x 10^-2)
      ——Add per 25 mm stroke2.19 x 10^-6 (1.94 x 10^-5)5.48 x 10^-7 (4.85 x 10^-6)
      —10 mm Lead (zero stroke)4.91 x 10^-3 (4.34 x 10^-2)2.23 x 10^-3 (1.97 x 10^-2)
      ——Add per 25 mm stroke2.42 x 10^-6 (2.14 x 10^-5)6.04 x 10^-7 (5.34 x 10^-6)
      —20 mm Lead (zero stroke)4.93 x 10^-3 (4.37 x 10^-2)2.23 x 10^-3 (1.98 x 10^-2)
      ——Add per 25 mm stroke3.31 x 10^-6 (2.93 x 10^-5)8.28 x 10^-7 (7.33 x 10^-6)

       

      FTX095 Weights

       kglb
      Base Actuator Weight (Zero Stroke)1021
      Actuator Weight Adder (Per 25 mm of stroke)0.390.87
      Adder for Inline (excluding motor)2.96.5
      Adder for Parallel Drive (excluding motor)13.128.9
      Adder for Front Flange1.94.2
      Adder for Rear Clevis5.311.7
      Adder for Rear Eye5.111.3
      Adder for Rear Trunnion1.94.3
    • Data Curves

      ftx095-critical-speed


      ftx095-max-force

    • Estimated Life Time Curves

      ftx095-estimated-service-life

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

      FTX Order

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

       

      AA = FTX Frame Size

      095 = 95 mm (3.74 in)
      125 = 125 mm (5 in)
      215 = 215 mm (8.5 in)

      BBBB = Stroke Length

      0150 = 150 mm
      0300 = 300 mm
      0600 = 600 mm
      0900 = 900 mm

      CC = Screw Lead

      FTX095FTX125FTX215
      05 = 5 mm05 = 5 mm06 = 6 mm
      10 = 10 mm10 = 10 mm12 = 12 mm
      20 = 20 mm30 = 30 mm

      D = Lubrication Type

      1 = Grease
      2 = Oil

      E = Rod End Thread

      A = Male, metric thread
      B = Female, metric thread

      FFF = Motor Mounting Configurations

      NMT = None, base unit only
      N10 = Inline, includes shaft coupling
      P10 = Parallel, 1:1 belt reduction
      P20 = Parallel, 2:1 belt reduction

      Always discuss your motor selection with your local sales representative.

      GGG = Motor Mounting Dimension Code

      NNN = None, base unit only

       

      FTX095 (Inline or Parallel – 1:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      16513028608IRB
      165130325810IRC
      165130325010IRD
      14511028638JQA

       

      FTX095 (Parallel – 2:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      857022566GIA
      13011024508IPB
      16513024508IRA
      1008019406IMC
      14511024558JQD

       


      FTX125 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      12090328810G7A
      200114.34211310JSD
      215130326010ITE
      215180388010ITF
      215180428212IFG

       

       

      FTX125 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      857022566GIA
      185130325810IRC
      200114.3358010JSA

       


      FTX215 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      2151605511216GTA
      2652304211012IVC
      2652306014018JVC
      3002504811214IWA
      3002506014018JWA

       

       

      FTX215 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      1651304011212GRA
      215180388010ITF
      215180428512ITG
      2652303811010IVB
      2652304211012IVC

      MMM = Mechanical Options

      NNN = None
      L1/L2/L3… = External limit switches
      ME5 = Front Mounting Flange
      MP1 = Rear Clevis2
      MP3 = Rear Eye2
      MT2 = Rear Trunnion

  • FTX125
    • Performance Specifications

      FTX125 Specifications

        510
      Screw Leadmm510
      in0.1970.394
      Maximum Force*kN44.544.5
      lbf1000010000
      Life at Maximum Forcekm249.2486.3
      in x 10^69.8119.14
      C_a (Dynamic Load Rating)kN163.7162.4
      lbf3680036500
      Maximum Input TorqueNm46.582.3
      lbf-in412728
      Max Rated RPM @ Input ShaftRPM35003500
      Maximum Linear Speed @
      Maximum Rated RPM
      mm/sec292583
      in/sec11.523
      Friction TorqueNm2.232.23
      lbf-in2020
      Efficiency:
      System%7080
      Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative.
      * Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

       

      FTX125 Weights

       kglb
      Base Actuator Weight (Zero Stroke)2147
      Actuator Weight Adder (Per 25 mm of stroke)0.841.85
      Adder for Inline (excluding motor)6.815
      Adder for Parallel Drive (excluding motor)25.656.5
      Adder for Front Flange3.67.9
      Adder for Rear Clevis6.514.3
      Adder for Rear Eye6.313.8
      Adder for Rear Trunnion3.16.8

       

      FTX125 Inertias

      Base Unit InertiaZero Stroke [kg-m^2 (lb-in-s^2)]Add per 25 mm [kg-m^2 (lb-in-s^2)] 
      —5 mm Lead2.55 x 10^-3 (2.26 x 10^-2)4.62 x 10^-5 (4.09 x 10^-4)
      —10 mm Lead2.56 x 1^0-3 (2.27 x 10^-2)4.65 x 10^-5 (4.12 x 10^-4)
      —20 mm Lead2.61 x 10^-3 (2.31 x 10^-2)4.81 x 10^-5 (4.26 x 10^-4)
      Inline Drive Inertia<32 mm Motor Shaft Diameter>32 mm Motor Shaft DiameterAdd per 25 mm
      —5 mm Lead2.81 x 10^-3 (2.49 x 10^-2)3.35 x 10^-3 (2.97 x 10^-2)4.62 x 10^-5 (4.09 x 10^-4)
      —10 mm Lead2.82 x 10^-3 (2.50 x 10^-2)3.36 x 10^-3 (2.98 x 10^-2)4.65 x 10^-5 (4.12 x 10^-4)
      —20 mm Lead2.87 x 10^-3 (2.54 x 10^-2)3.41 x 10^-3 (3.02 x 10^-2)4.81 x 10^-5 (4.26 x 10^-4)
      Parallel Drive Inertia1:1 Reduction2:1 Reduction
      —5 mm Lead (zero stroke)9.43 x 10^-3 (8.34 x 10^-2)4.66 x 10-3 (4.12 x 10-2)
      ——Add per 25 mm stroke4.62 x 10^-5 (4.09 x 10^-4)1.15 x 10^-5 (1.02 x 10^-4)
      —10 mm Lead (zero stroke)9.44 x 10^-3 (8.35 x 10^-2)4.66 x 10^-3 (4.13 x 10^-2)
      ——Add per 25 mm stroke4.65 x 10^-5 (4.12 x 10^-4)1.16 x 10^-5 (1.03 x 10^-4)
      —20 mm Lead (zero stroke)9.49 x 10^-3 (8.39 x 10^-2)4.81 x 10^-5 (4.26 x 10^-4)
      ——Add per 25 mm stroke4.81 x 10^-5 (4.26 x 10^-4)1.20 x 10^-5 (1.06 x 10^-4)
    • Data Curves

      ftx125-critical-speed

       


       

      ftx125-max-force

    • Estimated Life Time Curves

      ftx125-estimated-service-life

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

      FTX Order

       

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

      AA = FTX Frame Size

      095 = 95 mm (3.74 in)
      125 = 125 mm (5 in)
      215 = 215 mm (8.5 in)

      BBBB = Stroke Length

      0150 = 150 mm
      0300 = 300 mm
      0600 = 600 mm
      0900 = 900 mm

      CC = Screw Lead

      FTX095FTX125FTX215
      05 = 5 mm05 = 5 mm06 = 6 mm
      10 = 10 mm10 = 10 mm12 = 12 mm
      20 = 20 mm30 = 30 mm

      D = Lubrication Type

      1 = Grease
      2 = Oil

      E = Rod End Thread

      A = Male, metric thread
      B = Female, metric thread

      FFF = Motor Mounting Configurations

      NMT = None, base unit only
      N10 = Inline, includes shaft coupling
      P10 = Parallel, 1:1 belt reduction
      P20 = Parallel, 2:1 belt reduction

      Always discuss your motor selection with your local sales representative.

      GGG = Motor Mounting Dimension Code

      NNN = None, base unit only

       

      FTX095 (Inline or Parallel – 1:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      16513028608IRB
      165130325810IRC
      165130325010IRD
      14511028638JQA

       

      FTX095 (Parallel – 2:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      857022566GIA
      13011024508IPB
      16513024508IRA
      1008019406IMC
      14511024558JQD

       


      FTX125 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      12090328810G7A
      200114.34211310JSD
      215130326010ITE
      215180388010ITF
      215180428212IFG

       

       

      FTX125 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      857022566GIA
      185130325810IRC
      200114.3358010JSA

       


      FTX215 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      2151605511216GTA
      2652304211012IVC
      2652306014018JVC
      3002504811214IWA
      3002506014018JWA

       

       

      FTX215 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      1651304011212GRA
      215180388010ITF
      215180428512ITG
      2652303811010IVB
      2652304211012IVC

      MMM = Mechanical Options

      NNN = None
      L1/L2/L3… = External limit switches
      ME5 = Front Mounting Flange
      MP1 = Rear Clevis2
      MP3 = Rear Eye2
      MT2 = Rear Trunnion

  • FTX215
    • Performance Specifications

      FTX215 Specifications

        61230
      Screw Leadmm61230
      in0.240.51.18
      Maximum Force*kN178178178
      lbf400004000040000
      Life at Maximum Forcekm79111414
      in x 10^63416
      C_a (Dynamic Load Rating)kN420374427
      lbf895008640084700
      Maximum Input TorqueNm243425976
      lbf-in214837608642
      Max Rated RPM @ Input ShaftRPM175017501750
      Maximum Linear Speed @ Maximum Rated RPMmm/sec175351875
      in/sec71434
      Friction TorqueNm5.75.75.7
      lbf-in505050
      Efficiency:
      System%708087
      *Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

       

      FTX215 Weights

       kglb
      Base Actuator Weight
      (Zero Stroke)
      103227
      Actuator Weight Adder
      (Per 25 mm of stroke)
      2.705.96
      Adder for Inline
      (excluding motor)
      38.685.1
      Adder for Parallel Drive
      (excluding motor)
      62.3137.3
      Adder for Front Flange26.758.8
      Adder for Rear Clevis32.571.6
      Adder for Rear Eye32.571.6
      Adder for Rear Trunnion9.6212

       

      FTX215 Inertia

         
      Base Unit Inertia
      6 mm LeadAdd per 25 mm, 6 mm Lead
      Base Unit - Input Drive Shaft Only4.25 x 10^2 (3.76 x 10^1)8.00 x 10^4 (7.08 x 10^3)
      12 mm LeadAdd per 25 mm, 12 mm Lead
      Base Unit - Input Drive Shaft Only4.26 x 10^2 (3.77 x 10^1)8.02 x 10^4 (7.10 x 10^3)
      30 mm LeadAdd per 25 mm, 30 mm Lead
      Base Unit - Input Drive Shaft Only4.31 x 10^2 (3.82 x 10^1)8.15 x 10^4 (7.21 x 10^3)
      Inline Drive Inertia
      6 mm LeadAdd per 25 mm, 6 mm Lead
      Inline Unit - w/Motor Coupling4.43 x 10^2 (3.92 x 10^1)8.00 x 10^4 (7.08 x 10^3)
      Inline Unit - w/Motor Coupling >55mm Shaft Diameter6.15 x 10^2 (5.44 x 10^1)8.00 x 10^4 (7.08 x 10^3)
      12 mm LeadAdd per 25 mm, 12 mm Lead
      Inline Unit - w/Motor Coupling4.44 x 10^2 (3.93 x 10^1)8.02 x 10^4 (7.10 x 10^3)
      Inline Unit - w/Motor Coupling >55mm Shaft Diameter6.16 x 10^2 (5.45 x 10^1)8.02 x 10^4 (7.10 x 10^3)
      30 mm LeadAdd per 25 mm, 30 mm Lead
      Inline Unit - w/Motor Coupling4.49 x 10^2 (3.98 x 10^1)8.15 x 10^4 (7.21 x 10^3)
      Inline Unit - w/Motor Coupling >55mm Shaft Diameter6.21 x 10^2 (5.50 x 10^1)8.15 x 10^4 (7.21 x 10^3)
      Parallel Drive Inertia
      6 mm LeadAdd per 25 mm, 6 mm Lead
      1:1 Reduction Parallel Belt Drive8.73 x 10^2 (7.72 x 10^1)8.00 x 10^4 (7.08 x 10^3)
      2:1 Reduction Parallel Belt Drive3.14 x 10^2 (2.78 x 10^1)2.00 x 10^4 (1.77 x 10^3)
      12 mm LeadAdd per 25 mm, 12 mm Lead
      1:1 Reduction Parallel Belt Drive8.74 x 10^2 (7.73 x 10^1)8.02 x 10^4 (7.10 x 10^3)
      2:1 Reduction Parallel Belt Drive3.14 x 10^2 (2.78 x 10^1)2.01 x 10^4 (1.78 x 10^3)
      30 mm LeadAdd per 25 mm, 30 mm Lead
      1:1 Reduction Parallel Belt Drive8.79 x 10^2 (7.78 x 10^1)8.15 x 10^4 (7.21 x 10^3)
    • Data Curves

      FTX215 Critical Speed


       

      FTX215 Max Force

    • Estimated Life Time Curves

      FTX215 Estimated Service Life

    • Ordering Guide

      To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

       

      FTX Order

       

      Product Selection Guidelines

      To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

      AA = FTX Frame Size

      095 = 95 mm (3.74 in)
      125 = 125 mm (5 in)
      215 = 215 mm (8.5 in)

      BBBB = Stroke Length

      0150 = 150 mm
      0300 = 300 mm
      0600 = 600 mm
      0900 = 900 mm

      CC = Screw Lead

      FTX095FTX125FTX215
      05 = 5 mm05 = 5 mm06 = 6 mm
      10 = 10 mm10 = 10 mm12 = 12 mm
      20 = 20 mm30 = 30 mm

      D = Lubrication Type

      1 = Grease
      2 = Oil

      E = Rod End Thread

      A = Male, metric thread
      B = Female, metric thread

      FFF = Motor Mounting Configurations

      NMT = None, base unit only
      N10 = Inline, includes shaft coupling
      P10 = Parallel, 1:1 belt reduction
      P20 = Parallel, 2:1 belt reduction

      Always discuss your motor selection with your local sales representative.

      GGG = Motor Mounting Dimension Code

      NNN = None, base unit only

       

      FTX095 (Inline or Parallel – 1:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      16513028608IRB
      165130325810IRC
      165130325010IRD
      14511028638JQA

       

      FTX095 (Parallel – 2:1)

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      686016485GFA
      756016485GHA
      857022566GIA
      13011024508IPB
      16513024508IRA
      1008019406IMC
      14511024558JQD

       


      FTX125 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      12090328810G7A
      200114.34211310JSD
      215130326010ITE
      215180388010ITF
      215180428212IFG

       

       

      FTX125 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      857022566GIA
      185130325810IRC
      200114.3358010JSA

       


      FTX215 (Inline or Parallel – 1:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      2151605511216GTA
      2652304211012IVC
      2652306014018JVC
      3002504811214IWA
      3002506014018JWA

       

       

      FTX215 (Parallel – 2:1)

       

      Bolt Circle Diameter
      (mm)
      Pilot
      Diameter
      (mm)
      Shaft
      Diameter
      (mm)
      Shaft
      Length
      (mm)
      Key Width (mm)Motor Mount Code
      1651304011212GRA
      215180388010ITF
      215180428512ITG
      2652303811010IVB
      2652304211012IVC

      MMM = Mechanical Options

      NNN = None
      L1/L2/L3… = External limit switches
      ME5 = Front Mounting Flange
      MP1 = Rear Clevis2
      MP3 = Rear Eye2
      MT2 = Rear Trunnion